Dear Madam, dear Sir, we are looking for LED medical penlight (medical certificate mandatory) made from alloy and working on AAA batteries. Please let me have info and offer, together with a copy of the CE / DOC / RoHs and optical certificate.

Is it possible to buy only 1?

 I am interested in importing some good diving flashlights and headlamps for shops we supply in the Cairns, northern Australia, I like TP-63, TP-907 and maybe more but need more details . Note: I cannot give big orders for new products. I would have to try some of each. Love to see your response Klaus

I Dear Sir, Good evening. Please comment on each point mentioned below for technical compliance by tomorrow …also you can offer us higher specs but below mentioned points are minimum requirement of the torch- 1 Capacity: Compact DC Torch should be capable of operating for up to 80 minutes at full capacity when fully charged with depth of penetration more than 100 meter in dense smoke environment. It should compatible with EMC/EMI test. Vendor Comment:- 2 Dimensions: Dimension of the unit should be not more than (L=300x B=150x H=150)mm Vendor Comment:- 3 Body: Light weight not more than Three kg with all accessories and be made of high strength aluminium or any other suitable material of equivalent strength of equivalent strength i.a.w NSS & shock and should not shatter on impact material selection should be based on following features:- (i) Corrosion resistant in marine environment (ii) Fire resistant (iii) Ultra-light weight (iv) High impact resistant (v) Splash proof(IP68)/ IP 67 Vendor Comment:- 4 Battery: Replaceable Li-on rechargeable maintenance free 12V-18V. =>4000mAH, DC battery should be commercially available and compliable for providing upto 80 minutes of operation timing at full capacity. Vendor Comment:- 5 Bulb: 12 V, minimum 30-watt metal halide HID with minimum 2000(low) and 3000(High) lumens. Vendor Comment:- 6 Portability: Should have strong moulded carrying handle to withstand the weight of equipment. Vendor Comment:- 7 Adaptor/Charger: Charger provided should be rugged and made of heavy-duty material and cable should be as per IS-5608(Part-I). It should be able to sustain impact and comply with NSS Shock Gr-II or equivalent. Vendor Comment:- Functional Characteristics:- The compact DC Torch is required to meet the following functional characteristics: 1. Should be provided with ON/OFF, continuous and press to operates and low/high intensity mode switches Vendor Comment:- 2. Should provide up to 80 minutes discharge/operational time at full capacity using metal Halide HID lamp when battery is fully charged. Battery voltage should not fall below 70% of the rated voltage during this period. Vendor Comment:- 3. Charging time to full charge of battery when fully discharged should not be more than 4hours. The charger/Touch should have over voltage protection at 250 Volts. The charging supply should cut-off automatically once equipment is fully charged. Vendor Comment:- 4. Should have an indication to appreciate the extent of charge (25%/50%/75%/100%). Vendor Comment:- 5. Should be provided with a provision for preventing deep discharge of battery by cutting off battery output when voltage drop to 70% of rated voltage. Vendor Comment:- 6. Should be provided with an indication for low voltage and low battery when voltage drop below 70% of rated voltage and battery power remaining is 20% respectively. Vendor Comment:- 7. It should be able to be charged from 220V/50Hz single-phase AC supply and 220V/60Hz single-phase supply. Vendor Comment:- 8. It should have minimum life time of 5 years/1000 charging cycles. Vendor Comment:- 9. It should have a portable battery, so that it can be removed and charged separately. Vendor Comment:-

Good afternoon Please inform us price and delivery time of 1,000 pieces Explosion  Proof IP-66 LED Flashlight, 5,000 LUMEN, Battery Rechargeable Please inform freight cost with 2 options. Option # 1 Destination Laredo, Tx. USA Option # 2 Destination to Seaport Manzanillo, Mexico Thank you