Wide Stainless Steel Mesh 202 304 316L Stainless Steel Wire Mesh For Filter

Stainless steel flat net

Stainless steel coil mesh

Imported stainless steel screen

stainless steel wire mesh sales

Stainless steel screen procurement

Yunnan stainless steel filter net

304 stainless steel filter net

stainless steel 316 net

In the direction of the width of the stainless steel wire mesh, that is, the two ends of the stainless steel wire mesh, the way of edge treatment is different, usually divided into wrapped edge and raw edge. In the direction of the width of the stainless steel wire mesh, that is, the two ends of the stainless steel wire mesh, the way of edge treatment is different, usually divided into wrapped edge and raw edge. The so-called wrapped edge refers to the two adjacent strands of the wire mesh is connected, and the two strands of the raw edge is not connected.

Stainless steel mesh is very common in the filter industry, in the industry is also has a very important position, can also be said to be indispensable, stainless steel mesh in the filter industry is very extensive application. The working principle of stainless steel mesh in the filter is: automatic cleaning filter element through pressure difference control and timing control.

304 stainless steel filter can also play a good decoration effect, I heard that now every household after the installation of Windows, basically will install a veil net, so not only can play a certain insect and dust control effect, but also can bring us a lot of convenience. Stainless steel mesh is one of them. It is a kind of anti-theft gauze net using diamond mesh as gauze, with high strength, impact resistance and other characteristics.

Stainless steel 316 mesh according to the different process and material form can be divided into: stainless steel braided square hole mesh, stainless steel mat mesh, stainless steel welding mesh, stainless steel plate mesh, stainless steel punching mesh and other varieties.

Stainless steel wire mesh weaving is the warp and weft wire every other on the upper and lower interwoven, that is, the warp and weft wire on the next interwoven way, is the most simple, the most common and the most common weaving method.

Stainless steel wire mesh twill weaving is characterized by the interwoven point or weft interwoven point on the surface of the continuous formation of the vector twill cycle, there must be at least 3 warp wire and 3 weft wire, the two conditions are indispensable. The twill line from the lower right direction to the upper left tilt, called left twill; Diagonal lines from the lower left to the upper right, called right twill.

Wrapping stainless steel mesh features: mesh is not easy to fall off, strong structure, high safety performance, not easy to cut hands, wrapping stainless steel mesh is generally large silk, mesh number of small stainless steel mesh, edge wire is not easy to fall off, woven structure is strong. The so-called wrapped edge refers to the two adjacent strands of the wire mesh is connected, and the two strands of the raw edge is not connected.