Mitsubishi servo motor 5kW type HG-JR503 HG-JR503B

    Mitsubishi servo motor 5kW type HG-JR503 HG-JR503B

Parameter description of HG-JR503: servo motor has low inertia, medium capacity, rated 3000r/min, 5kW, 200V standard motor, and HG-JR503B is of electromagnetic brake type.

Mitsubishi servo motor HG-JR503 and HG-JR503B product specifications

[Applicable series] MR-J4 series

[Command interface] CC-Link IE field network interface, SSCNET III/H interface, general interface

[Voltage level] 200V

[Applicable motor]

. CC-Link IE field network interface

MR-J4-700GF、MR-J4-700GF-RJ、MR-J4-700B-RJ010

MR-J4-500GF、MR-J4-500GF-RJ、MR-J4-500B-RJ010

. SSCNET III/H interface

MR-J4-700B、MR-J4-700B-RJ、MR-J4-DU900B、MR-J4-DU900B-RJ

MR-J4-500B、MR-J4-500B-RJ

. General interface

MR-J4-700A、MR-J4-700A-RJ、MR-J4-500A、MR-J4-500A-RJ

[Power supply capacity] 7.5kVA

[Continuous characteristic] Rated output 5.0kW, rated torque 15.9N · m

[Maximum torque] 47.7N · m (63.7)

[Rated speed] 3000 r/min

[Maximum speed] 5000 r/min

[Instantaneous allowable speed] 5750 r/min

[Power ratio at continuous rated torque]

. HG-JR503：133kW/s

. HG-JR503B：119kW/s

[Rated current] 27A

[Maximum current] 81A (108)

[Inertia J]

. HG-JR503：19

. HG-JR503B：21.1

[Recommended load inertia ratio] less than 10 times

[Speed and position detector] Absolute position and increment share 22-bit encoder (resolution of servo motor per revolution: 4194304pulses/rev)

[Oil seal] Yes

[Heat resistant glass] 155 (F)

[Vibration level] V10

[Allowable load of shaft] L 79mm, radial 2450N, axial 980N

[Weight]

. HG-JR503：18kg

. HG-JR503B：20kg

Characteristics of HG-JR503B electromagnetic brake for holding servo motor with electromagnetic brake:

[Form] Non-excitation action type (spring brake) safety brake

[Rated voltage] DC 24V (0~- 10%)

[Power consumption] 23 W

[Coil resistance] 25 Ω

[Inductance] 0.25 H

[Brake static friction torque] 16 N · m

[Release delay time] 0.12 seconds

[Brake delay time] DC cut-off 0.03 seconds

[Allowable braking capacity] 400J per brake, 4000J per hour

[Shake of brake on motor shaft] 0.1~0.6 degrees

[Brake life] 5000 times of braking, 400J of work for one braking

1. Mitsubishi full series PLC, frequency converter, human-machine interface, servo system.

2. Xinjie PLC, frequency converter, human-machine interface and servo system.

3. Delta PLC, frequency converter, human-machine interface and servo system.

4. Wellington human-machine interface and Hytec human-machine interface.

Mitsubishi servo motor HG-JR15K1MB;

Mitsubishi servo motor HG-JR11K1MB;

Mitsubishi servo drive MR-J4-11KA

Mitsubishi servo drive MR-J4-11KB

Mitsubishi servo drive HG-KR-23J with oil seal

Mitsubishi servo store HG-KR053

Mitsubishi servo motor HG-KR73BJ with oil seal

Mitsubishi servo motor HG-SR102BJ with oil seal

Mitsubishi MR-J4-15KB servo driver

Mitsubishi PLC (programmable controller) A, R, Q, L, CC-LNK, FX3SA, FX3G, FX3G, FX3U, FX5U and other series; 

Mitsubishi frequency converter A840, E840, F840, E740, D740, D720 series; Mitsubishi touch screen GT2000 series; Mitsubishi servo motor JE, J4 series. 

Mitsubishi programmable controller: FX3GA, FX3GE, FX3G, FX3U, FX3UC, FX2NC, A, Q, CC-LINK remote module and other series 

Mitsubishi variable frequency governor: FR-L700, FR-A700/500, F700/500, E700/500, D700/500, S500 and other series; 

Man-machine interface: GOT2000, GOT16, GOT15, GOT12, GOT11, GOT10, A900GOT, F900GOT and other series; 

AC servo system: MR-J4, MR-JE, MR-J3, MR-J2S, MR-E, MR-ES and other series; 

Tension control system: LE-40MTA (B), LD-FX, LD-50PAU and other series:

Low-voltage electrical appliances: S-N, TH-N, etc.