Customized clay figure animal plastic toy handicraft sample development enamel sample wax sample plastic 3D printing

First, model through computer modeling software. If you have ready-made models, such as animal models and characters

Or miniature buildings, etc. Then copy it to the 3D printer through SD card or USB flash disk. After printing settings, the printer can print them out. The breakdown of its working structure is as follows. The working principle of 3D printer is basically the same as that of traditional printer. It is composed of control components, mechanical components, print head, consumables and media. The printing principle is the same. 3D printer mainly designs a complete three-dimensional model on the computer before printing, and then prints it out.

Like laser forming technology, 3D printing adopts layered processing and superposition forming to complete 3D solid printing. The printing process of each layer is divided into two steps. First, spray a layer of special glue on the area to be formed. The glue droplets themselves are very small and not easy to diffuse. Then spray a layer of uniform powder. When the powder meets glue, it will solidify and bond rapidly, while the area without glue remains loose. In this way, under the alternation of one layer of glue and one layer of powder, the solid model will be "printed" and formed. After printing, the model can be "planed" by sweeping away the loose powder, and the remaining powder can be recycled.