100,000-1,000,000 kcal/h Oil Gas Fired Thermal oil Boiler, hot oil boiler for asphalt equipment

100,000-1,000,000 kcal/h Oil Gas Fired Thermal oil Boiler, hot oil boiler for asphalt equipment 

thermal capacity:350kw-1400KW

Working pressure:0.8-1.0 MPA

Outlet temperature:320 C

Available fuel:natural gas, coke oven gas, bio-gas，liquefied petroleum gas, diesel, heavy oil, light oil, crude oil

Available industries:Petroleum, chemical, chemical fiber, pharmaceutical, textile printing and dyeing, building materials, wood processing, vegetable oil processing and other industries

This thermal oil boiler takes heat carries oil as medium and uses the hot oil circulating pump force the medium to make liquid circluation ,then the thermal energy will be transmitted to the devices and back to furnace to be reheated. so the boiler can get higher working temperature at low pressure ,and make a better usage of heat , it is a kind of safe boiler with high efficiency and low power consumption this series boiler have advinced program control system, equiped with liquid level controller,pressure controller ,temperature controller ,and alarms to make sure the boiler work orderly and it is a kind of safe boiler with high efficiency and low power consumption .

Technical Parameters:

Boiler Feature

1.Thermal oil boiler is a special once-through type boiler developed on the basis of forced circulation

2.Tthe coil structure ensure sufficient heated surface and a high thermal efficiency.

3.Reasonable structure, complete auxiliary facilities,short installation cycle, easy operation and maintenance, simple boiler layout.

4.The fuel is burnt adiabatically in the combustion chamber, hence it provides easier ignition  more sufficient combustion and higher thermal efficiency

5.In addition to thermal oil,light oil, heavy oil, diesel oil, natural gas, coal gas, biomass fuel,pure coal or mixed coal and biomass fuels are available as well.

FAQ

What is the highest temperature that thermal oil heater could achieve?

thermal oil heater can reach as high as 330℃, and working under low pressure (<1.0MPa)

YY(Q)W series horizontal type oil gas fired thermal fluid heater.

What are the heat-resistance temperature of grate and furnace?

The heat resistance temperature of grate is related to the grate material, the highest temperature could be as high as 1100℃, and the lower temperature could be 700℃.

The highest heat resistance temperature of furnace could be about 1700℃~1800℃.

What is conduction oil/ hot oil / heat transfer fluid?

Conduction oil has a high boiling point, it usually used for the industries that need the temperature of 150~350℃, to instead of steam. The hot oil has the advantages of high transfer efficiency, fast heat transfer, and good thermal stability.

What about the maintenance?

I will offer you the timely maintenance way sheet after installation of the boiler mainly parts.