CR738 Common Rail Test bench test HEUI C7 C9 C-9 and EUI EUP injector and pump

CR738 Test bench is used to test HEUI C7 C9 C-9 and EUI EUP injector and pump 

1, All common rail injector (include piezo )

2,All common rail pumps

3,HP0 PUMP testing

4,EUI/EUP testing

5,HEUI injector testing

6,HEUI pump testing

7,CAT320D pump testing

8,Electronic pump testing

9,Measurement unit testing

10,Armature stroke AHE tester

Main Features
1.Test all the manufacturers of common rail injector
2.Test all the manufacturers of piezo injector
3.Test all the manufacturers of common rail pump
4.Test DENSO HP0 pump
5.Test CAT common rail (HEUI) injector
6.Test CAT common rail (HEUI) engine oil pump
7.Test CAT 320D common rail pump (the world’s first successful development)
8.Test EUI/EUP (can adjust the lift but not to change the camshaft)
9.Drive circuit board(solenoid valve electric parameters to enhance the voltage current,time,pull in voltage ,current,time,keep voltage ,current,time,according to the setting of parameters of production factory)
10.Accept the speed sensor ,encode signal,high speed solenoid valve drive signal.Accept the speed sensor ,encoder signal,output 2 PWM drive signal, 2 way solenoid valve drive signal,1 high speed solenoid valve drive signal.
Driving signal waveform can be programmed.

Contact Us

Taian Dongtai Machine Manufacturing Co., Ltd.

• *Email
  Please enter Your valid email address.
• *To

  Taian Dongtai Machine Manufacturing Co., Ltd.
• *Message
  Your inquiry content must be between 20 to 5000 characters.
•  

  Please enter a correct verification code.

Send Now