CR800 COMMON RAIL IINJECTOR TESTER

CR1000 COMMON RAIL INJECTOR TESTER 

CR1000

High pressure common rail injector tester user manual

Chinese,English, optional

Support magnetic and piezo injectors(BOSCH, DENSO,DELPHI);

Support piezo injectors(BOSCH,DENSO,SIEMENS)

Support Caterpillar injector(C7,C9)

Support VE test;

Overcurrent and short circuit protection

Support magnetic injector impedance measurement;

Record number of users

Customizable boot LOGO;

According to customer demand for customized software interface, operation, chassis appearance;

1 Outline
1.1 Brief introduction
CR1000 high-pressure common rail injector tester function is used to drive common rail injector, while providing Bosch, Denso, Delphi,SIEMENS,Caterpillar and other common rail injector control signal to drive the high-pressure common rail injector to work, drive signal parameters can be carried out by the user according to their actual situation, and can be saved grouped for easy maintenance personnel to high-pressure common rail injector in working condition to judge different conditions and maintenance.
1.2 About Security
To ensure safe operation, please follow the following rules:
1,in the course of operating the tester, the operator should wear safety glasses;
2,using a separate dedicated outlet and reliable grounding. The tester is a three-wire power cord plug is connected to a standard three-wire outlet, please ensure reliable grounding;
3,if the power supply voltage is unstable, please connect the power supply voltage tester uses;
4,regularly check the AC power cord is damaged, and the power plug or power outlet for dust accumulation;
5,if the tester abnormal conditions occur, or an abnormal sound or smell, or the tester can not be hot to the touch, stop using it immediately and unplug the AC power outlet power cord and all other cables;
6,if the tester fails, please contact the service personnel to obtain necessary assistance;
1.3 Use and maintenance
1,Do not throw, drop or step on the tester, the tester to avoid being a strong external impact;
2,Do not insert foreign objects into the connector portion tester;
3,Do not allow water or other liquids to flow into the interior or on the tester tester;
4,,do not touch with wet hands AC power cord terminals;
5,,do not let dust or foreign matter on the terminals around the AC power, the AC terminals on the accumulation of dust and foreign matter may cause a fire or electric shock;
6,avoid stepping on or pinched AC power cord;
7,unplug the power cord when cleaning the tester.

. 9