Back heater and massager Qirui Massage Apparatus with Built-in Overheat and Overcurrent Protector Safety High and Low Noise

At present, the massage industry market is in the red sea. Even Fuan City, Fujian Province, where the massage industry cluster is located, is a mixture of fishes and dragons. More than one hundred massage manufacturers, large and small, are located in the outskirts of Fuan City. A large part of them are assembled by purchasing spare parts. There are also many enterprises that simply assemble massage devices. The company is also known as a manufacturer of massagers.  

Massage industry is an old industry. It has been a century and a half globally, and its technical maturity has reached its peak. However, at present, the serious excess capacity and the serious homogenization of consumer products result in vicious competition in the market price war. The result is "fake and inferior products, shoddy products, rough manufacturing, Shanzhai aquatic products", which causes a chaos in the market. Users can not tell which one is the problem massager at all.

At present, many massagers using aluminium wire motor and secondary doping material on the market are difficult to distinguish in appearance. Aluminum wire motor has small force and is easy to heat. The core shell with secondary doping material has soft voice and can not bite teeth. If pure copper motor is used with secondary doping material, the gear will bite teeth easily and damage, and the price will be slightly higher. A large part. Also, don't think that the price of the massager with the second doping material will be very low, no, he is smarter than the user. His price is really cheaper than our regular enterprise, but it will never be cheaper by half or more. Because it is too cheap, the user does not believe it, so he will position the price under the Qirui massager. Walk close to us, always cheaper than our Qirui massage machine, and then you feel cheap. This is the truth of the massage market today.

Up to now, Qirui massager has been implemented for five consecutive years without quality complaints, and I have been advocating "dead knock design sense of full quality dead knock". Only imported ABS original rice core shell, Dupont high hardness and high precision massage head nylon 66 gear and seamless steel shell double high-performance high-torque silent motor, adhere to the use of environmentally friendly and energy-saving materials to ensure reliable quality.

Qirui massager has been serving for 5 years in Sincerity Tong. It has transparent price, honest service, no hidden fee. It serves more than 1530 customers annually and exports to 23 countries and regions. It has no complaints from customers for 4 consecutive years.

Core advantages

1）We export to 23 countries and regions

2）Special product can be order with one pcs.

3）adhere to the use of environmentally friendly energy-saving materials

4）Quality Supervision Institution Testing and Certification Guarantees Safety

5）6 years insisting on the production of quality

6）85% of the business comes from the referral of old customers

7）2535 customers serving no quality complaints for 5 consecutive years

8）management systems certificated by Medical Device Quality Management System. We can trace down to the responsible persons even for the tiniest details

Fu An Qi Rui massager features:

1.we only want to serve the distinguished 20% of the market share

Only serve for the 20% esteemed customers

2.95 % of the customers order on payment never meet with us

3.Qirui is not a small workshop. We have a 500 square meters office

4.5 years senior membership of Alibaba Gold Supplier of domestic trade which is featured with price transparency no hidden costs

5.We are a enterprise that participates in charitable and voluntary activities to give back to the society and fulfill our social responsibility

6.Self-owned R&D team, more than half of the R&D staff have been working on R&D for more than 10 years

7.Adopting the only intelligent automatic CNC machining center in Fu'an, the whole production line has almost no manual labor

Technical performance

1.The use of high-precision, high-hardness synchronous gear, imported DuPont POM achieving level 5 of material accuracy, the tooth surface is more wear-resistant, thus improving the life of the massager, but also effectively reduce the noise

2.Low vibration: Although the rotor has been precision machined, it has become in equilibrium. However, it is still balanced by high-precision dynamic balancing equipment. Therefore, the motor running vibration is very small.

3.Stable performance: key parts such as motor rotor and shaft are equipped with advanced CNC machining equipment to improve the interchangeability of parts.

4.Magnetic tile and carbon brush high efficiency, so the performance is stable, the motor uses double high material high-performance magnetic tile and high-quality carbon brush is more wear-resistant and non-magnetic loss, high efficiency, stable performance, and increased service life.

5.The transmission is stable and the bearing capacity is high: the worm teeth mesh with the worm gear teeth continuously, and there is no process of entering and exiting the meshing, so the work is stable, avoiding the pulsating noise, shock and vibration that instantaneously burst at the time of starting.

6.High safety, low noise, low temperature rise, built-in surge protector, motor rotor is made of high quality silicon steel sheet with copper material, temperature rise under normal load is less than 60K (ambient temperature 25°c), this series adopts high precision Low noise Z4 bearings further reduce noise and losses.

7.which are different from competitors' manufacturing processes. 23 heavy-duty inspections, all massager products including accessories, have achieved standardized design and production. Each product will undergo 20 minutes of silent testing and 40 minutes of performance testing before leaving the factory.

8.Use PTC ceramic heating components consume small power, controllable temperature, fast heating, instantaneous current surge protection, power consumption per hour only ¥0.02

9.The shell of the massager is made with imported original ABS, which is never doped with black material of secondary material. It has high toughness, impact resistance, higher strength and environmental protection. Its raw materials and manufacturing quality are more reliable and synchronized with top-level brands at home and abroad.

10.Low noise and high temperature resistance: the motor casing is made of seamless steel pipe, built-in EMC anti-interference, QZ-2/130 degree H-class insulation high temperature resistant pure copper wire, so the noise is low and high temperature resistant is good and safe。

11.Over 50,000 times of bionic resistance flexing test, green and environmentally friendly low-carbon formaldehyde-free skin-friendly leather, strictly in accordance with the "one inch and seven needles" international standard, hand-sewn, the length of the stitching is controlled at 0.4cm, and the error is less than 0.25mm. European and American standards will save your cost at least 30%。

12.U.S. DuPont POM Synchronous Gear Massage Head.

13.High temperature 60C°±2C°, low temperature -20C°±2C°, high and low temperature weather resistance recycling test, no cracking, no abnormality, ensuring stable quality.

Rui Rui insists on using environmentally friendly energy-saving materials

Tired to use the Rui Rui massager

Qirui massager for backache

E-mail：qiruigm@gmail.com

WhatsApp:13850385558

Facebook:13850385558