YC-015 RC-3000 Lab Spray Dryer

YC-015 RC-3000 Lab Spray Dryer

Brief introduction

The whole design is compact, can be placed in the laboratory or placed in a specially designed stainless steel rack, self into one, no other facilities can be run. One button power, color large LCD touch screen operation, can be fully automatic or manual monitoring of two operation modes, convenient operation and monitoring of the experimental process. Is the smallest volume, minimum noise, a very good drying effect of a spray dryer.

Mini spray dryer is mainly used in Colleges and universities, research and food, medicine and chemical enterprise laboratory production of particulate trace powder, of all solutions such as emulsion, suspending liquid with broad applicability, applicable to on the heat sensitivity material drying such as biological products, biological pesticide, enzyme preparations, because of the ejected material only in the spray into mist particle size is affected by high temperature, so just an instant heating, can keep the active material in the dry still maintain the active ingredients can not be damaged.

Features

Color touch screen operation, automatic control and manual control

Full automatic control: one key start, set the spray process parameters, the temperature reaches a predetermined temperature, peristaltic pump automatically start, touch screen display operating animation, operation process clearly show; shutdown just press the stop button, the machine automatically safe shutdown.

Manual control: if you need to adjust the process parameters in the experimental process, it is convenient to switch to the manual state, the whole experiment process color touch screen dynamic display (animation).

The built-in imported oil free air compressor, the powder particle size distribution, flow very well equipped with air inlet filter.

Feeding amount can be adjusted by feeding peristalsis pump, and the minimum sample size can reach 50ml. Magnetic mixer optional

After the dry powder, the particle size is more uniform, more than 95% of the dry powder in the same particle size range.

For viscous materials, provided with a nozzle cleaner (needle), in the nozzle is blocked, automatic cleaning, the frequency of needle can be adjusted automatically;

Innovation of the tower wall blowing device, material recovery rate is higher.

Technical parameter

1) full automatic control and manual control of the double control mode, the whole experiment process color touch screen dynamic display (animation)

2 inlet air temperature control: 30 to 300

3) out of the wind temperature control: 30 to 140

Evaporation water: ~ 2000ml/h ~ 1500mL/H

5 maximum feeding amount: the adjustable maximum is 2000ml/h

6) minimum feed rate: 50mL

7) can be upgraded into grade separation collection system

8) real-time control of PID constant temperature control technology, heating temperature control accuracy: + 1

9) drying time: 1 ~ 1.5S

10) shutdown protection function: shutdown only need to press the stop button, the machine in addition to the fan immediately stop running, guarantee equipment not because of wrong operation (forced off fan) and lead to burn out heating part.

11 color LCD touch screen parameters: inlet temperature / air outlet temperature / creeping pump speed / air volume / frequency of the needle

Nozzle diameter: 0.5mm/0.7mm/0.75mm/1.0mm/1.5mm/2.0mm optional, and can be customized according to the requirements of the

13) is provided with a nozzle cleaner (needle), is blocked at the nozzle, will automatically remove the needle, the frequency can be adjusted automatically

14) the whole machine is made of stainless steel, two fluid spray structure, spray, drying and collection system using transparent quality high boron silicon heat-resistant glass material manufacturing

15) built-in import devoid of air compressor oil, powder particle size showed a normal distribution, good fluidity, and noise is very low, in line with national standards for laboratory noise;

16) the power of the whole machine: /220V 3KW

17) tower wall blowing device, the higher the rate of material

(18) spray head cooling device (optional)

19) can be directly upgraded to be used for organic solvent material drying of nitrogen gas circulation system

(20) equipment size: 1200mm (high) * 650mm (long) * 500mm (wide)

Dear customer:

You see on our website products quotation, just a market reference price. We can according to customer specific requirements to give the actual price. 

Dear customer:

We ,Xi’an Yima Opto-electrical Technology Com.,Ltd. is an integrated economic entity of R&D,manufacturing and trading with over 20 years of history .

Our business scope covers various fields such as biochemical analysis,environmental protection,industrial testing, bioscience,medical apparatus and instruments,internet technology and some frontier science.

Through a long-time development,we own a national resources system of various professional talents , abundant supply for various components &parts and special materials, full producing &processing equipments , strong Technological standardization and a complete quality assurance system.

If you need OEM or ODM in manufacturing ,scientific research , market development and or you want to build your own brand in your country, it’s our honor to cooperate with you.In this way ,we have developed many products for our customers from the USA, Europe and South Africa and got good feedback on Alibaba.

We firmly believe that science and technology is no boundaries.

Our mission is to make every effort to contribute to all humanity.