CS350/CS16X combination multi-channel potentiostat/galvanostat /electrochemical workstation

Number of Channel: 16 channels (time-sharing measurement)

Control mode: main/slave

Communication: serial

Channel switching: 16-channel relay

Channel switch time: <50ms

Channel insulated resistance: >100MΩ

Power supply of CS16X expander: from expansion port of CS350

Potential control range: ±10V

Current control range: ±2.0A

Potential control accuracy: 0.1%×full range±1mV

Current control accuracy: 0.1%×full range

Potential resolution:10μV(>100Hz), 3μV(<10Hz)

Current resolution: <10pA

Potential rise time:<1μs(<10mA),<10μs(<2A)

Current range: 200nA~2A, 8 ranges

RE input impedance:1012Ω||20pF

Maximum current output: 2A

Compliance voltage: ±21V(expandable to 200V)

Current increment during scan: 1mA @1A/ms

CV and LSV scan rate: 0.001mV~10000V/s

Potential increment during scan: 0.076mV @1V/ms

CA and CC pulse width: 0.0001~65000s

DPV and NPV pulse width: 0.0001~1000s

SWV frequency: 0.001~100KHz

Minimum potential increment in CV: 0.075mV

AD data acquisition: 16bit@1 MHz,20bit@1 kHz

Potential and current range: automatic

DA resolution: 16bit, setup time: 1μs

Low-pass filters: covering 8-decade

Communication Interface: USB2.0

Dimension(cm) / Weight:
CS350:36.5(W)X30.5 (D)X16 (H) ,6.5Kg
CS16X:36.5(W)X30.5 (D)X12 (H) ,3.5Kg

Signal generator

Frequency range:10μHz~1MHz

AC signal amplitude:1mV~2500mV

Frequency accuracy:0.005%

Signal resolution:0.1mV  RMS

DDS Output impedance:50Ω

DC Bias:-10V~+10V

Sine Wave distortion: <1%

Waveform: Sine wave, triangular wave and square wave

Scan mode: Logarithmic/linear, increase/decrease

Signal analyzer

Integral time: maximum: 106 cycles or 105s

Measurement delay: 0~105s

Integral time: minimum: 10ms or the longest time of a cycle

DC offset compensation

Potential automatic compensation range: -10V~+10V

Current compensation range: -1A~+1A

Bandwidth: 8-decade frequency range, automatic and manual setting