6000m3/h hydraulic cutter suction dredger

                Weifang Hailing dredger co.Ltd

        1.     Located in Weifang City,Shandong

        2.     9 workshops

        3.     One office building for sales department

        4.     Established in 2011,expansion for mass production compare to Haiyang

        5.     Dredger producting ,assemble,testing and dismantle for shiping center.

        6.     15000 square meter for workers recreation

        7.     Testing center for 8mdepth

8.     Near to Weifang Port

1.  cutter suction dredger, dredger manufacturer at your services

 The dredger we produce is self-propelled or non self-propelled,portable cutter suction dredger.

The hull uses dismantle and box-like structure, which equipped with horizontal shifting devices, cutter ladder lifting devices, spud devices, deck crane and so on. It can also be equipped with anchoring poles and trolley devices.

Generally, it has functions on dredging, conveying and discharging of mud or sand.

It can produce certain amount of vacuum by the centrifugal pump.

 2. Product images for your references

  products images:   

 workshop images:

Our cutter suction dredgers are designed by senior engineer, who have specialized in shipbuilding and dredging work for many years, to guarantee they are well-designed and practical.

Every cutter suction dredger is built by skilled workers and inspected strictly to assure the high quality and durability. Each finished dredger will be tested in our testing center to make sure it works smoothly when delivering to customers.

Spares:

The dredge pump is driven by the main diesel engine through the gear down box.

The alternator driven by the auxiliary diesel engine supplies the electricity for the whole ship power and lighting.

The genet supplies the electricity for lighting and emergency use when the ship stops.

The cutter (bucket wheel) is dirven by hydraulic motor, the cutter(bucket wheel) bear has lubrication seal device.

The dredger is moved by the alternate swing of the spuds. The spuds is lifted by the hydraulic cylinder.

The shifting winch,cutter(bucket wheel) ladder lifting winches fixed on the ship are driven by the hydraulic motor.

The hydraulic pump is driven by the auxiliary diesel engine.

The design,building and inspection are in according to the standard requirements of CCS.

Our company and testing pools:

The specification list for your reference:

Transportation:

 Shipping to the Tianjin Port.

Our dredger will be dismantle for different parts and then shipping to the port. The dismantle structrue is convenient for transport in the working process if in different working sites.

Customers' visiting:

Note

All necessory tools, tackles, plants and machineries required for the installation, testing and commissioning of silt dredging equipment shall be in the scope of the buyer.

It is the responsibility of the buyer to store of the material at appropriate locations at their own cost if required. However, storage site shall be provided by the buyer.

Installation

Responsibility for the seller

The seller shall provide technical personnel who are skilled and experienced in their respective callings and help installation for the work at hand.

Engineers for helping installation and debugging

The seller shall provide two engineers on the site in the execution of the training works for skilled, semi-skilled and unskilled workers of the buyer

 The buyer shall be responsible for the recruitment, transportation, accommodation, and medical care and catering of all labor, local or expatriate, and for all payments in connection therewith.