V9000 Series Test Modules,Comprehensive Ethernet Tester,Network Testing Device

Port Number

2 x 100G Port

2 x 100G Port + 12 x10G

Port Rate

100G/40G

100G/40G, 10G/100G(Combo)

Physical

Status Indicators: Tx/Rx
Weight: 0.5kg
Size: 271mm x 35.5mm x 180mm
Peak power requirement: 100W Max

Status Indicators: Tx/Rx
Weight: 0.6kg
Size: 271mm x 35.5mm x 180mm 
Peak power requirement: 100W Max

Traffic Generation

Traffic generating based on port and stream, per port have up to 256 different streams
Each stream provide up to 4 saltus step domain
Accurate data rate regulation based on port and stream, support dynamic data rate regulation
Each stream is capable of generating packets of IPv4, IPv6, TCP, UDP, TCP6, UDP6, Ping, IGMP, ARP, etc. 
Each stream support multiple levels of VLAN and MPLS 
Signature block is optional in each stream
Each stream supports user-defined packets

Traffic Statistics

Statistics results can be displayed in the form of data table and chart
Each port can receive up to 1024 streams
Traffic statistics based on streams: 
TX/RX frame count, TX/RX rate count, RX frame Sequence miss count, RX frame IP payload check errors count, Maximum, minimum and average SF latency count, Maximum, minimum and average CT latency
Traffic statistics based on ports:
TX/RX frame count, TX/RX stream count, TX/RX rate count, RX frame IP header checksum errors count, RX frame FCS errors count, frames through user-defined filters count

Traffic Capture

RX data frame capture
TX/RX control frame capture 
Frame capture based on filter templet 
Decode hundreds of protocols 
Support captured frame search according to specific conditions
Intuitive display of frames’ features such as source IP address, destination IP address, type of protocol and etc.

Protocol Emulation

Integrated IPv4 and IPv6 dual stack, support ARP, NDP, Ping
Each port can simulate tens of thousands of interfaces and support sub-interfaces
Each port can simulate tens of millions of realistic connections
Protocol emulation on RIPv2，RIPng，OSPFv2，OSPFv3，ISISv4，ISISv6，BGP4，PPPoE Client ,DHCP Client，IGMPv2，IGMPv3，GMRP，802.1x，LDP and 802.3ah

Transmitting mode

Continuous, Single burst, Multi burst, Time burst and Serialized

Software Support

TeleExplorer test system, Test suit of RFC 2544/RFC 2889/RFC3918, TeleATT – automated Test system for product line

Others

Easy-to-use graphical user interface
Support C++, C# and TCL API for customizing tests