Honeycomb sandblasting room，Surface treatment equipment

Characteristic:

1. Simple operation: ordinary workers can operate the machine skillfully after half an hour of training, and advanced automatic control system can prevent workers from misoperation.

2. High production efficiency: The average daily processing capacity of a frozen sand blasting machine is equal to 50-80 skilled workers.

3. High sand blasting precision: it can remove very small and hidden flying edges, not limited by product shape, high qualified rate and stable sand blasting quality.

4. Removable structure is complex, any shape of small rubber-plastic alloy products, brittle plastic products and magnesium alloy, zinc alloy, aluminum alloy casting flying edge.

5, do not damage the surface of products, improve the appearance quality of products, and increase the service life of products.

6, less land, a frozen sandblasting machine with ancillary equipment only 10 square meters.

7. Reduce the cost of the mold and rubber material. The equipment does not need to tear edge. It only requires the flying edge to be as thin as possible below 0.2 mm. The overflow groove is as small as possible. The flying edge allowance is only 1/5-1/10 of the tearing edge mold.

8, energy saving and environmental protection: machine energy consumption is very low, and the exhaust gas is the original nitrogen component of the air.

Scope of application: treatment before electroplating and spraying to improve adhesion; All kinds of molds, casting parts, stamping parts, metal surface to remove oxide, residue, rust, oil, old parts renovation; Ceramic products, glass products, plastic products lighting, atomization, edge removal, deburr, enhance spray adhesion.

The advantages of sandblasting machine are:

1. the metal parts of the sandblaster are basically free from damage and the dimensional accuracy will not change.

2. the surface of the parts is not contaminated, and the abrasive will not react with the parts.

3. Sandblasting machine can easily handle grooves, grooves and other difficult to contact parts, a variety of granularity of abrasive can choose to use;

4. The cost of treatment is greatly reduced, mainly reflected in the improvement of the efficiency of the sandblasting machine, which can meet various surface finishing requirements.

5. low energy consumption and low cost.

6. sandblasting machine does not pollute the environment, and saves the cost of environmental treatment.

Email:1602005722@qq.com