- Nine delong machinery (kunshan)CO.,LTD
- China Manufacturer with main products:rubber runaway sheet extruder ,Plastic runway sheet production line ,EVA automotive interior trim sheet extruder , PET reclaimed material granulator ,damping sheet extrusion line ,adhesive tape production line ,PET plastic granulator , PVC cable material granulator ,calcium carbonate masterbatch granulator ,carbon black masterbatch granulator
Home > Products > single screw extruder > EPDM sheet exruder
EPDM sheet exruder
- 100 Set / Sets per Month
- shanghai
- T/T
- 3 days
Product Details
Brand Name: | Nine Delong | Place of Origin: | China | Model Number: | JDL-150 |
Certification: | ISO9002 | After-sales Service Provided: | Engineers available to service machinery overseas | Weight: | 19500KG |
Dimension(L*W*H): | 20*4*2.5M | Voltage: | 380/220 | Application: | Sheet |
Condition: | New | Power(W): | 75000 | Automatic Grade: | semi-automatization |
Plastic Processed: | Polystyrene | Screw Design: | Single-screw |
Product Description
Epdm is a rubber that is polymerized by ethylene and propylene through solution, and then the third monomer (ENB) is introduced.Epdm is basically a kind of saturated high polymer, good aging resistance, good weather resistance, excellent electrical insulation, good chemical resistance and good impact elasticity.
Production line:
1. Preparation before launch.
1.1 apply grease to the place where lubrication is needed, check the oil level, and make up the maximum and minimum of the oil level if necessary.
1.2 open the valve of the compressed air and check whether the pipe is leaking.Check the water level of the tank, add water to 2/3 of the tank volume, start the pump, and check whether the water pressure value is between 0.3-0.4Mpa.
1.3 cleaning bin and hopper, adding raw materials, raw materials should meet at least 1 hour of production.
1.4 start the cutting machine to check whether the rotation direction of the cutter is correct.
2. Start
2.1 the heating process is carried out in three stages, and the interval is about 15min between each stage.When the operating temperature is reached, it is necessary to tighten the heater connection screw again.
2.2 according to the requirements of the process, the temperature of each region shall be set. After the temperature in each region reaches the set value, the temperature shall remain constant for 50 minutes, and the temperature control meter and solenoid valve shall be checked for normal.
2.3 open the lubricating oil valve to further confirm that there is no oil leak and open the water cooler switch of the lubricating oil.
2.4 set the main engine speed, start the main motor and gradually increase under the condition of idling, keep the rotating speed of 20rpm for about 1 minute, and check whether the idle current of the main engine is stable.
2.5 low speed start feeding motor and start feeding.When the material is extruded from the head, accelerate the screw speed and gradually speed up the feeding speed to match the speed of the main engine, increasing no more than 50rpm each time.
2.6 when the equipment is stable for a certain period of time, the valve opening of the regulating cylinder is at its best.
2.7 the vacuum system is opened after stable operation of the extruder.
Contact Us
- Nine delong machinery (kunshan)CO.,LTD
- Contact namemengbozhao
- Phone86-512-36835696-813
- AddressNo.28 xiangbangjing,RD Suzhou,Jiangsu
single screw extruder | twin screw masterbatch granulator |
- PVB Solar Film Production Line
- Multi-layer co-extrusion cast film extrusion line
- PC Hollow Sunshine Sheet Extrusion Line
- TPO Multi-layer film coating and laminating production line
- TPO interior skin laminating line
- Medical polymer splint polycaprolactone PCL sheet production line
- Anti-static PVC Super Transparent Soft Glass / Soft Board Production Line
- PMMA/GPPS Composite Diffusion Plate Production Line for Liquid Crystal Displays
- BOPS film production line
- Stone paper extrusion production equipment
- Aluminium-plastic composite film production line
- SGP film production line equipment
Popular Searches
- plastic extruder
- extrusion machine
- twin screw extruder
- aluminum tube production line
- production line
- extruding machine
- Production Equipment
- extrusion line
- Belt Making Machinery
- Extruder Machine
- Pet Strap Making Machine
- Bubble Film Making Machine
- Cable Manufacturing Equipment
- plastic extrusion
- plastic machinery
- Cable Extruder Machine
Find Similar Products By Category
- Machinery > Plastic & Rubber Machinery > Plastic Product Making Machinery > Plastic Extruders
- Buy on GoldSupplier.com
- How to Buy
- Browse by Catagories
- Browse by Hot Regoins
- Private Sourcing Events
- Sell on GoldSupplier.com
- How to Sell
- Post Products
- Manage Products
- Manage Groups
- About
- About Us
- Link to Us
- Contact Us
- Sitemap
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
mengbozhao
Welcome to my shop! Glad to serve you!Please send your question!
Your message has exceeded the limit.
Your message has exceeded the limit.
-
-
Your inquiry content must be between 20 to 5000 characters.Send Now.
-
Please input the mailbox.
-