Supply jewelry procrssing equipment-Microcomputer automatic faceting machine-

XX-6M

The automatic Angle machine can grind and polish the surface cutting surface of the mixed stone egg-shaped ring surface. The number of processing layers is seven.

Principle: install 5 stepper motors, 5 actuators and 5 sensors.Mechanical arm for horizontal tension positioning reduction;

L operating process:

L 1 mode selection: 50 processing data are built-in for storage and transmission. Enter by window prompt, and the selected mode number is the current processing or programming storage number.

2. Layer number and plate number setting: namely, the number of layers (within which there are 7-10 layers) of stone processing and the number of processing boards (with 16 boards in each layer); for example, 8-16 of circular surfaces.In the first layer, there are 8 boards, there are 8 boards in the second layer, there are 8 boards in the second layer, there are 2=8 boards in the second layer, there are 16 boards in the third layer, then 3=16.

L 3. Angle and Angle setting: their layers, each plate manipulator stepper motor Angle numerical programming (note: each step motor running a circular number representation to 3200, namely, their Numbers for 1 0.1125 degrees, the following when programming. By numerical based on). : after entering the layers menu, Angle Angle was on behalf of the board, 1-15 are expressed as the Angle of 2-16 rebounds

L 4: machinist pitch Angle setting: the Angle of the manipulator and cd-rom programming each level, according to the processing of shape, after entering the layers menu, : according to A, B key to choose ze layer, layer number, press * confirm programming according to A, B key rapid adjustment, according to the C, D: key fine-tuning, specific to the specific shape processing parts. 5. Playing sand height Settings: namely the mechanical processing of their height, after entering the menu, press AB choose ze layer, layer number, press the * key to confirm programming press B A quick adjustment, C, D key fine-tuning, concrete generally will be subject to stone plate. But the specific situation will be subject to specific shape processing parts.

L is applicable to: corundum, spinel, ruby, turquoise, olivine, topaz/topaz, sapphire, tourmaline/tourmaline, garnet, agate, amber, tiger's eye, zircon, glass

L machinable shape: round, oval, square, rectangle, triangle, pear-shaped, heart-shaped, water droplets, horse eye shape, the plum flower, star, leaf shape, axes, three-dimensional beads, three-dimensional droplets, stereoscopic triangle Square ring surface, quit egg-shaped face, pear-shaped ring surface, etc

Auxiliary material: diamond forming disc/polishing disc/polishing powder

L technical parameters:

Voltage /Voltage: /AC220V

L motor Power /Power: 180W

Nature/nature speed: 2800r/min

L biggest plate size /The biggest plate size:8 talents

Quantity offlat: the number of machining layers is seven, with 16 boards in each layer

L shape size /Dimension: 560mm long x 800mm wide x 1390mm high