2 channels switch fiber modem with data rs232 over fiber converter

Based on the integrated circuit intellectual property rights;

The input switch normally open and close automatically, when the input state, switch output that is why state, convenient opening;

The switch quantity of other switch state stability in the boot state or fiber no access, no chaos motion state;

Provide 1 way switch and RS485 data;

A switch interface lightning reaches IEC61000-4-5 (8/20 μ S) differential mode: 6KV, impedance (2); common mode: 6KV, impedance (2) standard;

The optional AC 220V, DC -48V, DC +24V, DC power supply positive and negative pole points (this device supports only DC +5V supply).

Specification：

   Fiber

Multi-mode Fiber

50/125um, 62.5/125um,

Maximum transmission distance: 2KM@62.5/125um single mode fiber, attenuation (3dbm/km)

Wave Length: 820nm

Transmitting power: -12dBm (Min) ~-9dBm (Max)

Receiver sensitivity: -28dBm (Min)

Link budget: 16dBm

Single-mode Fiber

8/125um, 9/125um

Maximum transmission distance: 40Km

Transmission distance: 40KM@9/125um single mode fiber, attenuation (0.35dbm/km)

Wave Length: 1310nm

Transmitting power: -9dBm (Min) ~-8dBm (Max)

Receiver sensitivity: -27dBm (Min)

Link budget: 18dBm

 Switch

 Response time: <2ms

 Delay time: 0.5ms

 Switch signal: 30VDC/0.5A

 Connector: RJ45

 Frequency response: 20HZ/S

   power

 Voltage：       DC： 5V

 Consumption：     ≤5W

  size

¨         Size：(L×W×H)  103×93×28mm

 Working Environment

Working temperature:  -10°C ~ 50°C
Working Humidity:    5%~95 % (no condensation)

Storage temperature:     -40°C ~ 80°C
Storage Humidity:    5%~95 % (no condensation)

Application: