- Shanghai Baudcom Communication Device Co.,Ltd.
- China Manufacturer with main products:Fiber Media Converter ,Interface Converter ,Optical Fiber Multiplexer ,Ethernet Switch ,SDH Multiplexer System ,VOIP/GSM gateway ,IP DSLAM ,CWDM MUX System ,Fiber Optical transceiver ,Fiber testing tools ,EPON/GPON ,EOC master/slave
Home > Products > Optical Transceiver > GPON SFP OLT Transceiver Tx1490nm/Rx1310nm 20km
GPON SFP OLT Transceiver Tx1490nm/Rx1310nm 20km
USD $20 - $30
/ Piece
1 Piece(Min.Order)
- 50000 Piece / Pieces per Month
- Shanghai
- T/T L/C D/P D/A Credit Card PayPal Other Cash Escrow
- 7 days
You May Like
- ZTE 5928E, RS-5928E, RS-59EC-PWR-AC10, RS-59EC-PWR-DC10, 24 GE RJ45 + 1 expansion card ZTE ZXR10 5928E 5952E 5916E RS-5916E RS-
- ZTE 2952E, RS-2952E-AC, RS-2952E-DC, 48 FE RJ45 4 GE SFP ZTE ZXR10 2952E 2928E 2918E 2910E
- ZTE 3950-28TM, RS-3950-28TM-AC, 24 FE RJ45 + 2 GE SFP + 1 expansion card slot ZTE ZXR10 3950
- ZTE 2950-18TC, RS-2950-18TC-AC, 16 FE RJ45 + 2 GE Combo ZTE ZXR10 2950
- ZTE S2XF48A, 48-port 10GE SFP+ optical interface ZTE ZXR10 8902E 8905E 8908E 8912E RS-8902E RS-8905E RS-8908E RS-8912E
- ZTE 5250-28PM-H, RS-5250-28PM-H, 20 GE RJ45 (POE/POE+) + 4 GE Combo ports + 1 expansion card ZTE ZXR10 5250
Product Details
Brand Name: | Baudcom | Place of Origin: | China | Model Number: | BD-4321S-C2CDA |
Product Description
Description
The BD-4321S-C2CDA transceiver is the high performance module for single fiber by using 1490nm continuous-mode transmitter and 1310nm burst-mode receiver. It is optical line terminal(OLT) for ITU-T G984.2. The optical transceiver is compliant with the Small Form- Factor Pluggable (SFP) Multi-Source Agreement (MSA).
The transmitter section uses a 1490nm DFB LD with automatic power control (APC) function and temperature compensation circuitry to ensure stable extinction ratio over all operating temperature range. and is ClassⅠlaser compliant IEC825 and CDRH standards.The receiver has a hermetically packaged burst-mode APD-TIA (trans-impedance amplifier) pre-amplifier and a burst-mode limiting amplifier with LVPECL compatible differential outputs.
The receiver also includes the function of burst mode signal detect output and fast RSSI output which is enabled by a trigger. When the burst optical power is on, the receiver outputs high level; when the burst optical power is off, the receiver outputs low level. Fast RSSI function can satisfy more severe timing demand to monitor the power from any ONU.
Ordering information
BD-4321S-C2CDA | Tx1490nm, Rx1310nm , 2.5Gbps/1.25Gbps, Class C+, 20km, 0C~+70C With Digital Diagnostic Monitoring |
BD-4321S-C2CDB | Tx1490nm,Rx1310nm,2.5Gbps/1.25Gbps,Class B+, 20km,0C~+70C With Digital Diagnostic Monitoring |
Features
w Single Fiber Transceiver with single mode SC receptacle
w 1490nm continuous-mode transmitter with DFB laser
w 1310nm burst-mode receiver with APD-TIA
w Can reach 20km transmission distance
w Single 3.3V power supply
w Reset burst-mode receiver design
w Burst mode signal detect output which is LVTTL compatible.
w Burst mode received signal strength indication (RSSI) output
w Complies with ITU-T G984.2 Class C+
w Digital diagnostic interface compliant with SFF-8472 Rev 9.4 ,
w Complies with RoHS directive (2002/95/EC)
w Operating case temperature:
w Standard : 0 to +70°C
Applications
w Gigabit Passive Optical Networks (G-PON) – OLT side
Absolute Maximum Ratings
Parameter | Symbol | Min. | Max. | Units | Notes |
Storage Temperature | Tst | -40 | +85 | °C | - |
Operating Case Temperature | Tc | 0 | 70 | °C | - |
Operating Humidity | RH | 5 | 90 | % | Non-condensing |
Input Voltage | - | GND | Vcc | V | - |
Power Supply Voltage | Vcc-Vee | 0 | 3.6 | V | - |
Recommended Operating Conditions
Parameter | Symbol | Min | Typical | Max | Unit | |
Operating Case Temperature | Standard | Tc | 0 | - | +70 | °C |
Power Supply Voltage | Vcc | 3.13 | 3.3 | 3.47 | V | |
Power Supply Current | Icc | - | - | 500 | mA | |
Optical and Electrical Characteristics
Parameter | Symbol | Min | Typical | Max | Unit | Notes | |
Transmitter | |||||||
Data Rate | 2.5 | Gb/S | |||||
Centre Wavelength | λc | 1480 | 1500 | nm | |||
Spectral Width | ∆λ | 0.4 | 1 | nm | |||
Side Mode Suppression Ratio | SMSR | 30 | dB | ||||
Average Output Power | Pout | 3 | 7 | dBm | 1 | ||
Extinction Ratio | ER | 8.2 | dB | ||||
Average Launch Power-OFF Transmitter | Poff | -40 | dBm | ||||
Optical Eye Diagram | Compliant with G984.2 | ||||||
Optical Rise/Fall Time (20%~80%) | tr/tf | 160 | ps | ||||
Data Input Swing Differential | VIN | 200 | 2400 | mV | 2 | ||
Input Differential Impedance | ZIN | 90 | 100 | 110 | Ω | ||
TX Disable | Disable | 2.0 | Vcc | V | |||
Enable | 0 | 0.8 | V | ||||
TX Fault | Fault | 2.0 | Vcc | V | |||
Normal | 0 | 0.8 | V | ||||
Receiver | |||||||
Data Rate | 1.25 | Gb/S | |||||
Centre Wavelength | λc | 1260 | 1360 | nm | |||
Receiver Sensitivity | Sen | -30 | dBm | 3 | |||
Receiver Overload | Sat | -12 | dBm | 3 | |||
Receiver CID Tolerance | 72 | Bit | |||||
Receiver Reflectance | -20 | dB | |||||
Data Output Voltage - High | VOH | VccR -1.05 | VccR – 0.85 | V | 4 | ||
Data Output Voltage - Low | VOL | VccR -1.84 | VccR – 1.60 | V | 4 | ||
Burst Detect De-assert | BSD_D | -45 | dBm | ||||
Burst Detect Assert | BSD_A | -32 | dBm | ||||
Burst Detect Hysteresis | 1 | 6 | dBm | ||||
BRST_Det High | V_DET H | 2.4 | VCC | V | |||
BRST_Det Low | V_DETL | 0 | 0.4 | V | |||
Reciever Power DDM (RSSI) Error | RXDDM | +/-3 | dBm | 5 |
Contact Us
- Shanghai Baudcom Communication Device Co.,Ltd.
- Contact nameLinda
- Phone86-21-37709251
Product Categories
New Products
- FortiGate FortiWiFi 80F Series FG-80F/FG-81F
- 2x2 Magnet Fiber Optical Switch 1550nm
- 1550nm 1x4 Magnet Fiber Optical Switch SM
- 1520-1580nm 1x2 Magnet Fiber Optical Switch
- Magneto optical switch 1XN
- Magneto optical switch 1X1
- Magneto optical switch 1X1
- Magneto optical switch 1X4
- Magneto optical switch 1X2
- MEMS optical attenuator module
- PM MEMS VOA module
- Multi-channel MEMS VOA module
Popular Searches
- Optical Amplifier
- joint closure
- fiber optic
- ftth
- telecommunication
- Camera Dome Enclosure
- video transceiver
- distribution box
- Fiber Optic Equipment
- fusion splicer
- optical fiber splicing machine
- fiber optic fusion splicer
- fiber optic adapter
- optical fiber fusion splicer
- machine fiber optic fusion
- fiber optic splicing kit
Find Similar Products By Category
- Telecommunications > Communication Equipment > Fiber Optic Equipment
- Buy on GoldSupplier.com
- How to Buy
- Browse by Catagories
- Browse by Hot Regoins
- Private Sourcing Events
- Sell on GoldSupplier.com
- How to Sell
- Post Products
- Manage Products
- Manage Groups
- About
- About Us
- Link to Us
- Contact Us
- Sitemap
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
Linda
Welcome to my shop! Glad to serve you!Please send your question!
Your message has exceeded the limit.
Contact supplier for lowest price
Your message has exceeded the limit.
-
-
Your inquiry content must be between 20 to 5000 characters.Send Now.
-
Please input the mailbox.
-