10G SFP+ to SFP+ Fiber Converter OEO 3R Repeater

Description:

The 10G Fiber Converter is protocol-independent with dual XFP or SFP+ ports, the 10G  fiber converter can provide conversion between different wavelengths or single-mode and multi-mode fiber, single-mode to single-mode fiber or multi-mode to single-strand single-mode fiber.

The device can be used as 10G fiber mode mode or fiber repeater to extend the 10G network distance

The 10G device support SDH/SONET STM-64/OC-192，10G fiber channel，10G Ethernet etc and can be applied in Telecommunication room, R&D laboratory, Data center or even 1310nm /1550nm/CWDM/DWDM Optical Wavelength Conversion.

The 10G fiber converter can be used as standalone device with external power or used as plug in card used in BD10 Chasiss.

Features:

• Support 2U Rack（16 Slots） and independent use

• Support network management （Web SNMP, Console）

• Support in-band management

• Support ITUT prescribed DWDM/CWDM wavelength

• Optical signal regeneration: 3R ( Re-amplify, Reshape, and Retime the signal ) ensures that there is a quality link at 10 Gigabit speeds.

• Support Jumbo Frame

• Transparent Transpor and very low delay

• Support DMI function for SFP+/XFP fiber module

• Support Loopback test function

• Support PRBS Generator and checker

• Support hot plugging

• Full State Led display

•    Easy installation

• 
  

Specifications:

Equipment function:3R Repeater
Transmission Speed:10Gb/s（9.95Gb/s-11.35Gb/s）
Protocols:10Gbase-R，10Gbase-LRM
Access Type:IEEE802.3ae 10G LAN/ 10G WAN
 
Interface Type
Type A:   SFP+ To/From SFP+ 
Type B:  SFP+ To/From XFP
Type C:  XFP To/From XFP
  
Transmission Distance
Up to SFP＋ module（Max 40Km） 
Up to XFP module （Max 80Km）
  
power requirement
Rack-mountable : AC 85 ～ 220V OR DC -48V 
Standalone: AC 220V OR -48V
Power consumption: ≤4W
  
Work Environment
Operating Temp: 0~ 50 ℃ 
Storage Temp: -10~ 70 ℃
Humidity: 5%~90% （non-condensing）
 
Dimension Card ： 11.5mm （W）× 78mm （D） 
Standalone ：156mm （W）×128mm（D）×32mm（H）

Question: Can I input 2Gbps signal into the 10G optical fiber repeater?

Answer: The 10G fiber repeater can only support 9.95Gb/s-11.35Gb/s.If your rate is 2Gbps,you can choose our 2.5G fiber repeater.

Ordering information