cbn cutting tool

Cubic Boron Nitride Inserts (CBN Inserts) Is A High-Performance Type Of Cutting Tool Material From A Polycrystalline Mass. CBN Is A High Hardness, High Heat Resistance Crystal Synthesized By Boron And Nitrogen Under High Temperature And High Pressure.

Applications Of Solid CBN Inserts:

Processing Workpiece: Rough And Finish Machining Of The Hard Steel ,Cast Iron And Hard Surface Workpiece.

Processing Materials: Ferrous Materials Possessing Hardness From Approximately 45 HRC As Well As Gray Cast Iron, Cr-Chilled Cast Iron And Wear Alloys On A Cobalt, Nickel Or Iron Basis.

Specification Of Solid CBN Inserts:

Inserts Type	Dimensions				Standard Cutting Edge
	L	Ø I.C	S	R
CNMN090404	9	9.525	4.76	0.4	S02020
CNMN090408	9	9.525	4.76	0.4
CNMN090412	9	9.525	4.76	1.2
CNMN120404	12	12.7	4.76	0.4
CNMN120408	12	12.7	4.76	0.8
CNMN120412	12	12.7	4.76	1.2
CNMN120704	12	12.7	7.94	0.4
CNMN120708	12	12.7	7.94	0.8
CNMN120712	12	12.7	7.94	1.2
CNMN120804	12	12.7	8.0	0.4
CNMN120808	12	12.7	8.0	0.8
CNMN120812	12	12.7	8.0	1.2
CNMN160708	16	15.875	7.94	0.8
CNMN160712	16	15.875	7.94	1.2
CNMN160716	16	15.875	7.94	1.6

* Other Types Of Solid CBN Like SCGN,DNUN,WNMN,RCMO,CNML,DNML ,All Available Upon Request. For More Information, Please Click On The PDF Below.

Specification Of Solid CBN Inserts.Pdf  ( Please Click On The Link Download)

If you need any products, do not hesitate to contact

annamoresuper@gmail.com

@moresuperhard.com