Thermodynamic Type Steam Trap (GATD42)
- 1000 Piece / Pieces per Month
- Ningbo
- T/T L/C Other
- 45 days
Product Details
Brand Name: | Goole | Place of Origin: | China | Model Number: | GATD42 |
Material: | Forged | Application: | General | Structure: | Pilot |
Standard or Nonstandard: | Standard | Pressure: | Medium Pressure | Power: | Pneumatic |
Port Size: | Ningbo | Media: | Water | Temperature of Media: | Medium Temperature |
Product Description
Brief Introduction.
TD42 Steam Trap is a kind of thermodynamic steam trap which is mainly used for the environment with low condensate back pressure and low capacity requirement, similar to Spirax Sarco Design.
Structural Characteristic.
1.Assembled with steam or air heat preservation mechanism and unaffected by the environmental humidity;
with operation frequency decreased, its service life prolonged.
2.Provided with filter screen and drainage valve .
3.The valve runs flexibly and reliably with large displacement.
Working Principle.
a.When device starts up,under the pressure from inlet,condensed water and air flow into steam trap and lift the disc,discharging condensed water quickly.
b.With high temperature condensed water flowing into the steam trap, secondary evaporation will arise,dynamic pressure rise and static pressure down,disc moves downward.
c.Meanwhile,secondary evapouration enter above the disc,pushing the disc move downward,stopping steam flowing out
d.With secondary evapouration condensing and forming more condensed water,steam trap start a new cycle.
Main Function.
The valve is applicable in the steam pipeline and equipment to avoid steam leakage and eliminate steam leakage in order to conserve energy and keep from water hammer and other faults.
Due to their compact design and cost effectiveness thermodynamic steam traps are widely used in applications where the condensate must be removed immediately from steam lines and steam equipment. They discharge the condensate near the saturation temperature.
Field of Application.
Product Name: TD42 thermodynamic steam trap.
Pressure Rating: 1.6- 6.4 Mpa.
Nominal Diameter: DN15-50 mm.
Body Material: Steel WCB,Stainless Steel.
Standard flanges: DIN, ANSI, JIS.
Standard Screwed:NPT,BSP.
Main Technical Parameters and Indexes of Performance.
Nominal pressure | PN63 |
Maximun design pressure(PMA) | 63bar g |
Maximun design temperature(TMA) | 400 |
Minimun design temperature(TMI) | -10 |
Maximun upstream pressure for saturated steam service(PMO) | 42bar g |
Maximun operating temperature(TMO) | 400 |
Minimun operating temperature(TMIO) | 0 |
Minimun differential pressure( PMiX ) | 0.25bar |
Maximum cold hydraulic test pressure | 95bar g |
Material of Main Component.
Name of component | Material of component |
Valve body, valve cover | WCB |
Others | stainless steel |
Main External Dimensions.
Product model | DN (mm) | Connection | Dimension | ||||
L | H1 | H2 | |||||
TD42 | 15 | Internal thread | 80 | 47 | 54 | ||
20 | Internal thread | 90 | 52 | 59 | |||
25 | Internal thread | 95 | 59 | 62 | |||
32 | Internal thread | 105 | 70.5 | 89.5 | |||
40 | Internal thread | 110 | 70.5 | 89.5 | |||
50 | Internal thread | 120 | 70.5 | 104.5 | |||
TD42 | 15 | Socket welded | 80 | 47 | 54 | ||
20 | Socket welded | 90 | 52 | 59 | |||
25 | Socket welded | 95 | 59 | 62 | |||
32 | Socket welded | 105 | 70.5 | 89.5 | |||
40 | Socket welded | 110 | 70.5 | 89.5 | |||
50 | Socket welded | 120 | 70.5 | 104.5 |
Contact Us
- Yongjia Goole Valve Co., Ltd.
safety valve | Pressure Reducing Valve | Ceramic Valve | strainer |
jacket valve | Power Station Valve | butterfly valve | Steam Trap |
control valve | Ball Valve |
- Bare Stem Fluorine Lined Butterfly Valve
- Alpha split isolated valve ABvalve OEB5level
- AlphaAB valve split butterfly valve
- AB valve Split Isolated Valve split butterfly valve
- Manual Operated Wafer Type PTFE Lined Butterfly Valve
- Pneumatic PTFE Lined Diaphragm Valve
- solenoid valve 22FDA-F5T-W220R-20 for thermal power plant
- solenoid valve J-110VDC-DN10-Y/20H/2AL for power generation
- ealing oil float tank float valve BYF-40 for power station
- Air transfer chute three-way to curved four-way distributor valve
- B500 Air chute pneumatic closure valve Inflatable manual plugboard valve
- Aseptic transfer αβ Valve manufacturer sealed feeding powder transfer AB valve
- Manufacturer of high activity powder transfer AB valve split type butterfly valve
- makeup water solenoid valve K25FJ-1.6PA2 for power generation
- AST/OPC solenoid valve 0508.919T0301.AW027 for power plant
- X43T-10Cast iron copper core two-way flanged plug valve
- PTFE Lined Globe Valve
- Stainless steel AB valve split type butterfly valve manufacturer Alfa Technology
- AB valve manufacturer split type butterfly valve Alfa Technology
- Manufacturer of high activity sealed feeding AB valve αβ valve
- PTFE Lined Butterfly Wafer Type Check Valve
- High temperature resistance electric Y-type three-way parting valve valve plate casting temperature 900℃
- solenoid valve DG4V 5 2C M U ED6 20 for power generation
- temperature Regulating valve LWH-ZG1/2 for thermal power plant
Popular Searches
Find Similar Products By Category
- Mechanical Parts & Fabrication Services > Valves
- Buy on GoldSupplier.com
- How to Buy
- Browse by Catagories
- Browse by Hot Regoins
- Private Sourcing Events
- Sell on GoldSupplier.com
- How to Sell
- Post Products
- Manage Products
- Manage Groups
- About
- About Us
- Link to Us
- Contact Us
- Sitemap
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
sales
Welcome to my shop! Glad to serve you!Please send your question!
Your message has exceeded the limit.
Your message has exceeded the limit.
-
-
Your inquiry content must be between 20 to 5000 characters.Send Now.
-
Please input the mailbox.
-