Home > Products > Pneumatic hydraulic jack > best 80 ton pneumatic hydraulic jack
best 80 ton pneumatic hydraulic jack
- 0 Set / Sets per Month
- Tianjin
- T/T
- 30 days
- mould ,plastic mould. injection mould ,plastic injection
- plastic , plastic product, plastic injection, plastic accessory, plastic part.
- aluminium and zinc hardware sliding Windows lock for OEM
- zamak windows bolt Windows latch for OEM
- Zinc windows latch aluminium Window latch for OEM
- aluminium zamak Windows lock for OEM
Product Details
Brand Name: | Qianding | Place of Origin: | China |
Product Description
80 ton pneumatic hydraulic jack
This hydraulic jack requires compressed air from an air compressor to lift heavy loads up to 80 Ton.
can be used for safely lifting, trailers, heavy trucks, buses, construction vehicles and agricultural vehicles. also easy to operate and are featured with divers safety options as dead man’s joystick which also aids controlled lowering speed.
With a minimum height of just 18.5 cm, almost every lifting point is accessible. This allows an entire range of vehicles to be jacked up.
ZIJIE supply pneumatic hydraulic jack which include 50 ton pneumatic hydraulic jack, 60 ton pneumatic hydraulic jack, pneumatic hydraulic beam jack and 80 ton pneumatic hydraulic jack. Our products have high quality and competitive prices.
• Quality jack with two large rubber wheels and a long handle with soft rubber grips
• First-class powder coating on entire construction, attractive and functional
• Minimum jacking height 21.0 cm and a narrow profile
• Operates with reliable hold-to-run joystick
• Shortcut for quick coupling of the air hose
• The jack can be moved, raised and dropped using the handle
• The handle can be locked in 4 positions; 0 º-45º-90º-180º
• The body has a 620 mm long reach
• Increased load stability with wide base
• The robust chassis is made from 4.5 mm steel plate and provides ultimate protection of the internal parts
• Internal and external hard-chrome cylinders resistant to wear and corrosion
• Each cylinder is fitted with two seals to prevent any oil loss
• Fast lifting by means of pneumatic high-pressure pump
• hook on the side of the chassis for the extensions
• Screw cap on the chassis for maintaining and repairing .
• Outside oil filling port for easy oil refilling
• Comes with 2 extensions to close gap between the saddle of the jack and the jacking point
Lifting Weight: | 80 Ton |
Working pressure: | 0.80-1.20 Mpa |
Minimum Height: | 210mm |
Lifting Height:50ton: | 181mm,100ton:92mm |
Extension Rod: | 38mm+60mm |
Working Pressure: | 31.50Mpa |
Net Weight: | 98Kg |
Final test
Every air hydraulic floor jack is fully tested at the factory before being packed along with its documentation, ready for shipment!
Warranty
The extra low garage jacks are delivered with a one year warranty.
Even after the warranty period expires, the test-department stands ready to assist you with technical support and information
Included in your order
• 100ton air hydraulic floor jack with wheels and handle
• instructions for use
• 38mm and 60 mm extension attachments
• Pre-filled with hydraulic fluid
• Packed weight is 108 kg with wooden case, 10 peices of handles with foam in one case ,handles case weights 95kg
• Dimensions are L 725 x W 340 x H 330 mm
Contact Us
- ZIJIE TRADING COMPANY
- Contact nameEric Guo
- Phone86-312-2174499
- AddressGuangda complex building,Xinshi District Baoding,Hebei
Pneumatic hydraulic jack | Combi bead breaker | Other tyre equipment |
- Potentiometer housing stretching parts, stainless steel stretching parts, electronic component shielding cover, sensor stretching shell.
- American standard plug, charger plug., American standard 23.3 * 6.25 * 1.45mm plug, H65 brass material, nickel plated, without burrs.
- Pneumatic quick connector spring clip, quick connector switch clip, tracheal connector spring clip. SUS304 stainless steel material, durable and long-lasting.
- Common mode inductor fixing clip. SUS301 material, product elasticity is very stable. We can develop molds according to the customer's design. Fast delivery time and good service.
- American standard plug, adapter switch plug, American standard 23.3 * 6.25 * 1.45mm plug, brass material, nickel plated, without burrs.
- European standard plug PIN, power adapter plug, brass plug, USB charger plug, brass material surface nickel, without burrs.
- Charger insert, power adapter insert, brass insert, USD charger insert, brass material surface nickel, without burrs.
- Brass connectors, brass terminals, H65 brass material, can be customized and produced according to customer requirements. Continuous mold production with precise dimensions.
- EP5 core cover, EP5 transformer clips, EP5 Inductive Shield Cover,SUS301 material,Inventory sales,fast delivery.
- BS3464_DN125_Cast_Iron_Gate_Valve_with_Square_Stem_Cap_for_T-Key_Handle_Operation
- Resilient gate valve DIN3352/F4 gate valve
- Large gate valve DIN3352 F4 Rising-stem gate valve
- DIN3352 F4 Rising-stem gate valve
- Metal Stamping Parts High Quality Hardware Parts Processing from China Supplier Factory Custom
- Metal Stamping Parts High precision Professional customization Machining Services for Appliance Industry
- Metal Stamping Parts Processing plant Excellent Material Precision Hardware Parts for the automotive industry
- High precision Metal Stamping Parts China Source Factory Stainless Steel Hardware Material Special-shaped Parts Professional Customization
- Brass connector insert, socket connection piece, small component metal stamping parts, customized metal stamping parts according to customer requirements. Phosphorus copper shrapnel.
- EP7 male and female clip, EP7 magnetic core fixing clip, SMD EP7 current transformer accessories, SK7 high carbon steel material, elastic stability.
- EP7 clamp EP7 transformer clip EP13 spring clamps,sk7 material,Inventory sales,fast delivery.
- Metal Stamping Parts for Irregular Parts High Efficiency Precision Punching Processing Factory Price
- Metal Stamping Parts Processing plant Excellent Material Precision Hardware Parts for the automotive industry
- Processing Plant Metallic Material High precision Metal Stamping Parts For Car Parts
- Potentiometer brass terminals, potentiometer connection terminals, potentiometer contact pieces, H65 brass stamping parts, precision mold continuous stamping processing, high efficiency and high quality.
Popular Searches
Find Similar Products By Category
- Hardware > Other Hardware
- Buy on GoldSupplier.com
- How to Buy
- Browse by Catagories
- Browse by Hot Regoins
- Private Sourcing Events
- Sell on GoldSupplier.com
- How to Sell
- Post Products
- Manage Products
- Manage Groups
- About
- About Us
- Link to Us
- Contact Us
- Sitemap
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
Eric Guo
Welcome to my shop! Glad to serve you!Please send your question!
Your message has exceeded the limit.
Your message has exceeded the limit.
-
-
Your inquiry content must be between 20 to 5000 characters.Send Now.
-
Please input the mailbox.
-