16 ports E1 Balun panel Coax to RJ45 75ohm to 120 Ohm impedance converter

Overview: 

• 75 ohm to 120 ohm Coax to RJ45 16E1 Balun Panel,19inch rack mount

                                             
  

Description:

Features:

• Data Rates to 2.048 Mbps

• 75 Ohm to 120 Ohm Twisted Pair （RJ45;

• Bi-Directional Signal Conversion

• 2U high enclosed chasiss

• mounts in a standard 19 inch(48.3cm) rack

• No AC Power or Batteries Needed

• 16 Female BNC connector Available

• BNC connector and RJ45 connector are front.

G.703 Interface

BNC connector 75OHM RJ45 connector 120OHM

RJ45 connector 120OHM as 1 2 TX,4 5 RX

Specification:

Transmission Line: ITU/CCITT G.703(unstructured)
Data Rate: 2.048 Mbps maximum
Unbalanced Coaxial Connection: Dual  coax  BNC  connectors,female  and  Nominal  Line Impedance=75 Ohms
Balanced Twisted Pair Connection: Single 8-pin RJ-45 jack,shielded(two twisted-pair),
                                                         Nominal Line Impedance=120 Ohms
Power Supply: None required,passive device
Operating Temp: 0-50℃(32-122oF)
Isolation: 1500V rms