2 channel RS485 Serial to Ethernet Converter Console server

Introduction

   The  Serial Server is the best choice for simple serial to Ethernet  connectivity applications. Delivering a cost effective solution in a  compact size, the serial server offers flexibility making it ideal for  applications that require an authentic serial connection across an  Ethernet network.  

The  Serial server can implement the conversion between 1channel  RS232/RS485/RS422 serial ports and 10/100M Ethernet ports, and two  models are available: complete machine and embedded module. It can be  extensively used for data collection of supervision and control system  for power in machine room and base station of operators, automatic  supervision and control for plant, automation of medical treatment and  medicine, networking control of electromechanical instrument, networking control of attendance checking, networking control of security/access control and other occasions.

Function Features

• 1.     It has a compact structure, adopting high-performance processor and high-capacity memory;
  2.     DeviceManager software for centralized management and control;
  3.     WEB browser for remote setup of the equipment;
  4.     It can support three communication modes: virtual serial port application, controls developed by our Company and Socket;
  5.     It can support 2 channel RS232/485/422
  6.     Rating of serial port reach 50BPS ~ 460800BPS;
  7.     Isupport three operating modes: TCP Server, TCP Client and UDP; the working port, destination IP and port can be set;
  8.     Ethernet supports 10M/100M, full-duplex / half-duplex and adaptive modes;
  9.     It can support multiple protocols: ETHERNET, ARP, IP, ICMP, IGMP, UDP, TCP, HTTP 10.   The serial port1 is general serial port (TxD/RxD/GND),the serial port2 is the full signal serial port(TxD/RxD/RTS/CTS/DTR/DSR/DCD/GND)
  

Ethernet Interface  

10/100Mbps rate   

full/duplex auto-negotiation 

Protocol: Support IEEE 802.3

RJ45 connector   

Serial interface   

Seletable RS232/RS422/RS485  

Software and hardware flow control  

DB9 connector  

TX and RX activity indicators

Power supply                         

working voltage range wide, good anti-disturb and Isolation, work stable      

option I – AC220V,range AC165V~AC240V  or AC110V.

Power Consumption:      <=5 Watts    

environment condition                   

Operating temperature:  0C~+55 C         

Storage temperature:   -20 C~+70 C Relative temperature:95% (uncondensed)

 Application:       

Connect serial devices to server based applications over an IP network       

Manage remote serial console ports over an IP network        

Virtual modem capability for modem-based applications

Ordering information