factory direct solar controller with Bluetooth, mobile phone APP display MPPT Solar Charge Controller

Product Description:

1. Increase the charging current, compared to the traditional PWM controller, MPPT charging efficiency can be increased by 10-30%. (Controller conversion efficiency> 95%)

2 can be selected by DIP switch 4 batteries. GEL battery, lead-acid (liquid) battery, AGM2 battery, LiFePO4 lithium iron phosphate battery

3. With load output, with over discharge, overload, short circuit protection.

4. With Bluetooth function, you can view the controller parameters through the phone APP display (MPPT5020-BT models only)

5. Automatic unattended charging. With overload, overheating, reverse current protection (cloudy or no sunlight at night, to prevent the battery back to the solar panel)

6. Overcharge protection. When the battery is full, the charging current will be reduced, when the battery is dead, it will immediately charge the battery

7. Automatic temperature compensation. Ensure the battery in the low temperature or high temperature environment, the use of charging parameters to extend battery life

It is strongly recommended not to install the battery and controller in place of heat source, so as to avoid controller's misoperation.

Shenzhen OLYS Technology 12 years focused on the development and manufacture of solar controller, master the core of solar energy, service more than 300 new energy companies.