Standard R910947943 A10vso45dr/31r-vkc62n00-so928 Bosch Rexroth Hydraulic Pump Variable Displacement

Product:

1 inclined disk axial piston pump for open circuit

2 The continuous working pressure is up to 280bar, and the instantaneous working pressure is up to 350bar.

3 The flow rate is proportional to the driving speed and displacement, and the stepless variable can be realized by adjusting the inclination angle of the inclined disk.

4 a variety of control methods such as constant pressure, constant constant voltage, constant pressure constant flow and so on, and the control response speed is fast.

5 low noise, high efficiency, high reliability, long life.

6 The oil absorbability of 6 small size and high power density is 

7 drive shaft can bear axial and radial load.

8 SAE and ISO mounting flanges.

9 can be used for the through axis structure for multi loop system.

Contact Us:

We are an independent hydraulic company that stocks new genuine Bosch Rexroth Pump & motors. We stock Atos, Yuken, Uchida and Nachi Piston Pump. To ensure the highest-quality hydraulic pump and motor repair or remanufactured unit, We stay up-to-date with the latest diagnostic and assembly and test equipment. 

If you have any problems please contact us by emailing a675991295@163.com

Features: 

This series of products is an axial piston type inclined plate structure, which is suitable for the static pressure transmission of the open system. The flow rate is proportional to the driving speed and inclined angle, and the displacement of the pump can be changed stepless by adjusting the inclination angle of the inclined disk.

The displacement of the pump can be changed stepless by adjusting the inclination angle of the inclined disk. The self-priming performance is good, the noise is low, allowing continuous work under 25MPa working pressure, the drive shaft can bear axial and radial load, various control modes and short control time, and can form compounding.