Standard Semi Downdraft Car Spray Booth Oven Siemens Electric Components

Delivery Time:20-25 working days
Certification:CE, TUV

Standard Semi Downdraft Car Spray Booth Oven Siemens Electric Components

Features

1. 0.476mm color steel with EPS inside for wall panel.

2. Quality brand name centrifugal fan with belt drive,with air capacity of 45000m ³/h

3. Pneumatic damper for spraying to baking cycle.

4. All panels are tongue and groove interlock structure

5. Siemens electric components.

Advantage

In painting, outside fresh air comes into the heating generators through the pre-filter system, and enters into the plenum, then filtered by ceiling filter and into the both which brings clean,

symmetrical and steady-going down airflow for spraying. After painting, Hot air goes from heating

generators to plenum, then enters room after filtered by ceiling filter, providing heat that is necessary for baking of cars surface. Afterwards, the air with little benzene will be released to the atmosphere after being filtered twice by the exhaust air filter.

Item	Detailed Specification
Inside dimension	17000×5000×5000 mm(L×W×H)
Outside dimension	19540×5140×5750 mm(L×W×H)
Pit	2 rows of pits in the ground for exhausting, dimension 16100×760mm (L×W), semi-down draft, with galvanized grilles (made by twisted steel and flat bar) above.
Front door	Folding door, 4-folds, 4000×4500mm (W×H), color: white.
Emergency door	2 units, 800×2000 mm (WXH), color: white.
Room body	Profiled bar beams in the roof and in the middle of the booth, to strengthen the room body; wall panel thickness:70mm, width:1150mm, tongue and groove structure, 0.476mm color steel with polystyrene(EPS) insulation inside, color: white, black profiles,
Light system	Ceiling Lights: 20Units×4Pcs=80Pcs×36W, with electronic ballasts. Side Lights: 22Units×4Pcs=88Pcs×36W, with electronic ballasts, up and down interleaving installation.
Generator cabinet	Generator cabinet on the back side, intake air from side upper direction, exhaust air from back upper direction, quadrate steel frame, outside is white coated steel, inside is galvanized steel,filled with heat preservation material in the middle, color: white
Intake and exhaust system	Inlet: 1×15KW double-intake centrifugal fan, belt drive, model TAE710H, air capacity is 45000m3/h, without motor, but with belts and pulleys;
	Outlet: 1×15KW double-intake centrifugal fan, belt drive, model TAE710H, air capacity is 45000m3/h, without motor, but with belts and pulleys;
Heating system	With 1 unit BT34 diesel burner, stainless steel heat exchanger, electric damper actuates from spraying to baking cycle, Max. temperature: 80℃
Purification system	Pre-filter, high efficiency filter (ceiling filter), fiberglass filter, activated carbon filter.
Roof	50mm thick EPS heat preservation panels.
Control system	Spraying, heating spraying, baking, time setting, lighting switch, failure indicator, temperature controller, power supply switch, emergency stop, time meter, temperature limiter, with Siemens components.
Power supply	1*220V, 3*380V, 60HZ