SCG353A047 Dust Collector Valve Dual Stage Stainless steel Diaphragm Valve

Certification:CE ISO9001
ASCO Aluminum dust collector valve dual stage 1 1/2 \" 24V DC diaphragm pulse jet valve

FEATURES:

1. The  SCG353A047 1.5 \" pulse diaphragm pulse valves are especially designed for dust collector service applications, combining high flow, long life and extremely fast opening and closing to provide reliable and economical operation ,The high flow, angle type bodies in combination with the special main diaphragm assemblies give the unique operating features required for dust collector service applications
2. Integral compression fittings for fast, easy, secure installation
3. Valves can be supplied according to ATEX Directive 94/9/EC for non-electrical equipment by using suffix GD ,The components satisfy all relevant EC directives

Specification:

Ordering Code	Port Size	Orifice	Flow Value	Coil type
G Threaded	mm	m3/h	l/min
SCG353A047	1 1/2\"	52	46	768	400425
SCG353A050	2\"	66	77	1290	400425
SCG353A051	2 1/2\"	66	92	1540	400425
SCG353.060	3\"	75	170	2833	400425

Construction:

Body	Aluminum
Core tube	Stainless steel
Core and Plugnut	Stainless steel
Core Spring	Stainless steel
Sealing & disc	CR (chloroprene)
Diaphragm	NBR(nitrile/buna-n) or Viton
Shading coil	Copper
Connector	DIN43650A
Voltage	DC: 24V, AC: 24V,48V,110V,230V
Working Temperature	-  20 to + 85 ℃
Protection Class	IP65
Coil Insulation Class	F
Working Pressure	0.35-0.85Mpa

OPTIONS:

1	Sequential controller for pilot solenoid valves, Pilot boxes containing 2 to 12 pilot solenoid valves
2	Valves can also be supplied with FPM (fluorelastomer) diaphragms and seal materials. Use the appropriate optional suffix \'V\' for identification
3	Pilot solenoid valves can be equipped with explosionproof solenoids for hazardous locations according to “ATEX” and national standards

INSTAllATION:

1	The valves can be mounted in any position without affecting operation,Threaded pipe connection is: G = G (ISO 228/1) or compression fittings
2	For compression fitting types tightness is achieved by the compressed gasket on the blow tube
3	Other pipe threads are available on request, Installation/maintenance instructions are included with each valve, Spare parts kit and replacement coils are available
4	When connecting piping or tubing to the G1/8 connection in the valve bonnet, the remote ASCO pilot valve should be mounted as close as possible to the main pulse valve. Connection tubing lengths of 3 meter or less have little effect on the pulse response. Installations with over 3 meter of tubing must be tested under actual operating conditions. Tubing with Ø 6 mm O.D. is recommended for all installations

DIMENSIONS (mm), WEIGHT (kg):

Ordering Code	A	B	C	D	E	F	G	H	J	K	L	Weight
SCG353A047	80	50	30	71	130	136	45	G 3/8 \"	131	160	178	1.4
SCG353A050	80	50	30	95	168	165	45	G 3/8 \"	165	210	227	2.9
SCG353A051	80	50	30	95	168	165	45	G 3/8 \"	165	210	227	2.6
SCG353.060	80	50	30	143	240	192	45	G 1/2 \"	165	258	275	4.1