YG6 YG8 K10 K20 carbide insert

Specifications

carbide insert
1)material:YG6-YG20,K05-K40
2)shape:button,angle,etc
3)field:cutting tool,drill tool
4)ISO9001:2008

YG6 YG8 K10 K20 carbide insert

Company Info

Henan Zhongmei Drill Tool Co., Ltd. is integrating scientific research, design, manufacture, sales and service, which is one of the main enterprises of Henan Zhongmei Group. It is a hi-tech company that manufactures drill tools and the relational products. They are used in many kinds of drilling, geology exploring, coalfield ISO9001:2008 and awarded 'Good Credit Demonstration Unit' by Henan Provincial Government.

 carbide insert

 tungsten carbide blank have a thin metal blade or disk with a sharp, usually toothed edge. Tungsten Carbide tips is used for cutting wood, metal, or other hard materials. They can be hand-operated or power-driven. Our carbide tips have used in surface processing of cast irons, colored metal and alloys, as well as nonmetal materials for hard metal, carbide rough turn, rough planning, and precision milling.

 

Specification

We supply tungsten carbide wear part, tungsten carbide blanks, tungsten carbide rod, tungsten carbide plate, tungsten carbide tips, tungsten carbide drill bits, tungsten carbide saw tips, tungsten carbide tools, tungsten carbide insert, tungsten carbide blade, tungsten carbide dies, tungsten carbide products.

 

Crade	Density	TRS		Hardness	USE
	(g/cm2)	(N/mm2)		(HRA)
YG8C	14.7	2200		88	Mostly used as the buttons of small and mediumsized percussion bits and as the inserts of rotary prospecting bits to cut soft and medium hard formations.
YG11	14.3	2100		88	Largely for the inserts and buttons of percussion bits and tricone bits to cut medium-hard,hard,and very hard formations.
YG11C	14.35	2200		87.6	Largely for the inserts and buttons of percussion bits and tricone bits to cut medium-hard,hard,and very hard formations.
YG10C	14.45	2450		87.6	Primarily for the buttons and inserts of rotary percussion bits to cut medium-hard and hard formations.
YG15	14.0	1500		86.5	Primarily for the buttons and inserts of rotary percussion bits to cut medium-hard and hard formations.