Fiberglass Surgical Orthopedic Cast Tape With FDA/CE Approval Casting Bandage

Fiberglass Surgical Orthopedic Cast Tape With FDA/CE Approval Casting Bandage

 fiberglass surgical orthopedic cast tape with fda ce approval casting bandage

13 years professional Manufacturer in orthopedic products:

- Orthopedic Casting Tapefiberglass surgical orthopedic cast tape with fda ce approval casting bandage

- Orthopedic Splint

- Under Cast Padding

- Stockinettefiberglass surgical orthopedic cast tape with fda ce approval casting bandage

- Glovesfiberglass surgical orthopedic cast tape with fda ce approval casting bandage

- Electric Cast Saw

 fiberglass surgical orthopedic cast tape with fda ce approval casting bandage

Product Description & Features     

It is made of knitted fiberglass or polyester fabric, impregnated with water-activated polyurethane resin. It is used for orthopedic illness or fracture from exteral wound, to preserve fixation for swollen or wounded joint.

It is the upgraded and replaced product of the traditional plaster bandage.

 fiberglass surgical orthopedic cast tape with fda ce approval casting bandage

♦ High strength and light weight: 20 times stronger and 5 times lighter than the traditional plaster bandage

♦ Excellent X-ray radiolucency: doctors can easily check the condition of treatment without removing cast

♦ Good air-permeability: less itchiness and skin irritation

♦ Quick solidifying and good mouldability: solidify in 3-4 minutes, bear weight enough in 20 minutes

♦ Waterproof: evaporate water rapidly due to its excellent air permeability, and maintain its solidity longer

♦ Environmenta friendly materials

Product Standard fiberglass surgical orthopedic cast tape with fda ce approval casting 

fiberglass surgical orthopedic cast tape with fda ce approval casting bandage

Direction for usefiberglass surgical orthopedic cast tape with fda ce approval casting ge

♦ Slip one layer of stockinet over the wounded part and wrap with cast padding.

♦ Gloves must be worn.

♦ Open only one roll at a time, immerse the roll of tape in room temperature water (20-25°C) for 3~5 seconds and squeeze 3~4 times.

♦ Wrap the tape spirally, taking care to avoid excess tightness. (overlapping the previous layer by one-half or two-thirds the width of the tape. )

♦ Smooth and rub the surface to achieve good contact between layers. About 3~4 minutes after immersion in water, Ansen Cast is sufficiently rigid to prevent further moulding.

Caution for storagefiberglass surgical orthopedic cast tape with fda ce approval casting 

fiberglass surgical orthopedic cast tape with fda ce approval casting bandage

♦Check bag without any breakage. Exposure to moisture or water initiates a chemical reaction that causes the fine tape to become rigid. Do not use the tape that feels hard.

♦ Stored in a cool, dry atmosphere. Temperature for storage is 15-30°C.

♦ If product has been exposed to low temperatures for a long period of time, switch lower items with upper items and preserve in higher temperatures for 3 hours before use.

 fiberglass surgical orthopedic cast tape with fda ce approval casting bandage

Our Workshop - Fair - Certifications fiberglass surgical orthopedic cast tape with fda ce approval casting bandagesting bandage

 fiberglass surgical orthopedic cast tape with fda ce approval casting bandage

Packaging: fiberglass surgical orthopedic cast tape with fda ce approval casting bandage

1st— 4 layers aluminized plastic bag

2nd—paper box

3rd—imported double thickening kraft corrugated carton

fiberglass surgical orthopedic cast tape with fda ce approval casting bandage

Welcome to contact us: