samarium cobalt disc magnet

 Shapes of SmCo

  Disc, Ring, Block, Segment, Cylinder, Trapezoid, Customized Design

 Applications of SmCo

sensors, magnetic processor, high-end motor

aerospace, defense industry, microwave devices,communications,

medical equipment, instruments, wind power, a variety of magnetic drives

SmCo Magnets

1:5 alloy material

Offers 16 MGOe (energy product) to 22 MGO

Made up of approximately 50% samarium and 50% cobalt.

Has a maximum recommended operating temperature of 250°C.

SmCo 1:5 magnets require lower field strengths than 2:17 materials to magnetize.

In some instances, 1:5 material may be magnetized with multiple poles, provided that a magnetizing fixture is available.  

2:17 alloy material

Offers 24 MGOe to 32 MGOe.

Thas a maximum operating temperature of 350°C.

Special grades of 2:17 are available which can operate to even higher temperatures.

SmCo 2:17 requires extremely high magnetizing fields, and multiple pole magnetization is not possible.

Composed of about 25% samarium, 5% copper, 18% iron, 2% hafnium or zirconium, with the remainder being cobalt.

 Magnetic properties of SmCo5 (Sintered SmCo Magnet, SmCo Magnets)

Magnetic properties of SmCo17 (Sintered SmCo Magnet, SmCo Magnets)

We are experienced and professional in manufacturing  and exporting various kinds of magnets.Below is the simple introduction of other magnets.

1.Rubber magnets,which are a composite material consisting of Ferrite magnet powder and rubber which provides the flexibility.Flexible magnets are abailable in strips, tapes and sheet format with or without self-adhesive backing. These are available in both Anisotropic & Isotropic grades. The Isotropic grades can be supplied with a coloured or plain white vinyl finish. Ferrite flexible magnets have existed as a product for over 30 years and principle applications include reed switch operation, magnetic masks and general light holding. This material can be readily cut using a sharp knife or scissors. It is also possible to injection mould ferrite magnet products, however specialist tooling is required.

2. Rare earth magnet, including sintered Neodymium-Iron-Boron, bonded Neodymium-Iron-Boron, sintered Samarium-Cobalt. All magnets are supplied in a wide ranof shapes such as: rectangular blocks, discs, rings and segments.

3.Ferrite magnet: Hard ferrite magnet and soft ferrite magnet including the MnZn and NiZn

1.Magnet property such as the Br, Hci, Hcb, BHmax
2.Magnetization direction 
3.Package requirements
4.Quantity (monthly or annual demand)

5.Drawing with dimensions and tolerances,material,surface treatment requirements,etc. 

Transportation: 

All available shipping ways could be applied, by courier, air or sea, better to choose by sea. 

1. By Sea: If the GW is over 50kg, we advise ship by sea when you are not urgent for the goods as the charge of ocean way is cheaper than by air. 

P.S Appointed shipping company or our own forwarders all could be used in shipment. 

2. By Air: If the good below 30kg, we advise ship by air as we HAWELL MAG signed a long-term agreement with Express (DHL, TNT, FedEx) and the best discount we can provide to you. 

FAQ: 

1.Q:Are you a factory or trading company?
A: We are a factory. 

2.Q:Where is your factory located? How can I visit there?
A: Our factory is located in Ningbo City, China.You can fly to Ningbo/Hangzhou airport directly. 

All our clients, from home or abroad, are warmly welcome to visit us!