60v12a lead acid charger battery manufacturer industrial 900w battery charger automatic 60v charger for lead acid battery

Specifications

1.60V12A Battery Charger.
2.Short-circuit protection.
3.Anti-intrusion protection.
4.The protection of anti-anti-access.

1.Automatic computer control.Recognize battery intelligent.

2. Wide Voltage Input(100-240v), Can be used in the United States and Europe.

3. Overcharge protection, Indicator shows:charging red, green fully charged, particularly convenient.

4. 2V-48V battery charging adaptive

5.Fish clip connector is easy to design and battery connector

6.Suit for below 2v-48v,500ah lead acid battery.

7.Can be charged directly to the 2V6V12V for single battery, time-saving convenience.

8.Charger connector can be flexible and change according to customer requirements, suitable for many occasions charge.

9.Special price level, especially for large quantities needed

 

Specifications

110/220V1.1  Rated input voltage 85Vac -265Vac1.2  Input voltage rang

 Continuously

47Hz -63Hz1.3

Input frequency range

 Continuously

Vin 110Vac/Vout 18.1A

 Efficiency ≥85%

Vin 220Vac/Vout 9.0A

100/240Vac/Out 0A

 No-load power ≤5W100/240Vac/Out 0A

No-load input current ≤ 65 mA100/240Vac/Out 1.6A

 Power Factor ≥0.45

Output and charge characteristics, functional lights instructions

Serial number

Conditions

Specifications

Rated output voltage

(14.7±0.02)XN+0.3v

60A±0.2A

Output current

at constant voltage mode

29.2V≤Vo≤29.6V

Output Voltage Range

at the output end of DC cable

Vin 110Vac/Vout 18.1A

Continuously

47Hz -63Hz1.

 Input frequency range

Continuously

Vin 110Vac/Vout 18.1A

Efficiency ≥85%

Vin 220Vac/Vout 9.0A

100/240Vac/Out 0A

No-load power ≤5W

100/240Vac/Out 0A

 No-load input current ≤ 65 mA

100/240Vac/Out 1.6A

Power Factor ≥0.45

Output and charge characteristics, functional lights instructions

Serial number

Conditions

Specifications

29.4V

2.1 Rated output voltage

60A±0.2A

Output current

at constant voltage mode

29.2V≤Vo≤29.6V

Output Voltage Range

at the output end of DC cable

2.4Vin 110Vac/Vout 18.1A

≤600mVp-pOutput voltage Ripple and Noise:(0.1uF